• <table id="gccuc"><option id="gccuc"></option></table>

    1. <p id="gccuc"></p>

          PRODUCT
          PRODUCT
          Multichannel Frequency Stability Testset
          發布者:Synchionization Technology Ltd.  作者:  發布時間:2020-12-22  瀏覽量:292次

                

               STM2048 Multichannel Frequency Stability Testsetr is a special test equipment developed1606029152224109.png

          specifically for the characteristics of frequency, the equipment supporting the host computer

          software, the frequency accuracy, frequency stability, frequency drift, phase drift and other

          frequency signal characteristics test. It can replace the traditional phase ratio meter and frequency

          scale comparator. Can achieve 0.5MHz ~ 30MHz arbitrary frequency point test, specific operation

          is simple, the measurement of high precision characteristics


          Product Features

          • Can simultaneously measure frequency stability, aging, phase drift and other parameters
          • Measurement frequency range: 0.5MHz~30MHz

          • Frequency stability: <6E-14 (typical value: 3E-14)

          • Multi-channel: 4 channels as standard, expandable to 16 channels (including reference input signal)

          • The complementary measurement signal and the reference signal do not need to be the same frequency

          • Sampling time: 1ms~1000s

          • Equipped with an upper computer, the measurement results are displayed and stored in real time


          Product Features

          Specifications

          Input Signal

          Reference input frequency: 0.5MHz~30MHz

          Reference input power: 5dBm~15dBm

          Measurement input frequency: 0.5MHz~30MHz

          Measuring input power: 5dBm~15dBm

          Input Signal Impedance: 50Ω

          Input signal waveform: sine wave/square wave

          Number of channels: 4 channels (expandable to 16 channels)

          Measurement output

          Measurement uncertainty: <6E-14@1S(Typical values:3E-14@ 1S)

          Specific phase accuracy: <100fs(Gating time 1S)

          Sampling time: 1ms,10ms,100ms,1s,10s,100s,1000s

          Power measurement accuracy: 0.1dB

          Measurement configuration mode:Input frequency automatic recognition

          Interface

          Communication interface: RJ45, Adaptive Ethernet
          Signal input: SMA

          Power

          Input Voltage: 

          Module Version: 12.0V±5% DC

          Chassis Version: 220VAC(176V~264V)50Hz(47Hz~63Hz)

          Power: ≤15W

          Environment

          Operating temperature: 0℃-+50℃

          Storage temperature: -40℃-+85℃




          国产91视频
        1. <table id="gccuc"><option id="gccuc"></option></table>

          1. <p id="gccuc"></p>