The Seamless Switcher is a non-destructive switcher that allows seamless switching between
multiple inputsignals automatically and manually through a measurement-taming method. Failure
or loss of any oneinput signal does not affect the phase continuity of the output signal, which is
suitable for clock sets, master andbackup systems and other fields with high requirements for time
signal continuity.
Product Features | Specification parameters |
RF Input | Input Frequency: 10MHz Input power range: 7-15dBm(Port Impedance50Ω) Spurious/Harmonics: ≥70dBc/≥30dBc Number of routes: 8 |
RF Output | Output Frequency: 10MHz Number of routes: 1路(Chassis version with 4 outputs) Output power: 10-15dBm Isolation: ≥100dB Frequency Stability: ≤5.0E-13/s Spurious/Harmonics: ≥80dBc/≥30dBc Phase noise:≤-110dBc@1Hz; ≤-135dBc/Hz@10Hz; ≤-145dBc/Hz@100Hz; ≤-155dBc/Hz@1kHz; ≤-155dBc/Hz@10kHz |
Phase change | Phase change before and after switching: ≤0.3ns |
Power | 220V(AC)/30W(MAX) |
Environment | Operating temperature: 0℃-+50℃ Storage temperature: -55℃-+85℃ |
Structure | Size: 1U |
Test Data
Manual switching of frequency and phase curves
Automatic switching of frequency and phase curves
